How much liquid chlorine to add to Pool?

How much liquid chlorine to add to Pool?

How much liquid chlorine to add to Pool? With or without a stabilizer, the optimal chlorine level in a swimming pool is between 2 and 3 mg per liter of water.

In other words, 2 or 3 ppm (parts per million). To correctly dose the chlorine in your pool, it is important to know the precise volume of your pool and to be patient to avoid overdosing. Proper water analysis is the key to a good chlorine dosage. So the question comes, how much liquid chlorine to add to pool?

Before starting with the question, how much liquid chlorine to add to pool?, you must know the characteristics of your water. Three parameters must be taken into account:

How much liquid chlorine to add to Pool & to control Chlorine Level

It is to optimize its oxidizing and disinfecting power, chlorine must be perfectly dosed. A too high may irritate the skin and eyes of bathers, while too low will not allow water to be sufficiently cleaned and then require the use of a clarifier or flocculant. This is your main answer to the question of how much liquid chlorine to add to pool?. But there is more.

The stabilizer rate

Some chlorines are sold with a stabilizer, called Triazine-2, 4, 6-Triol. If not, you will need to add the stabilizer to your pool water yourself. Composed of cyanuric acid, it makes it possible to reinforce the resistance of chlorine to UV rays which alter its effectiveness.

Read More: How many 80lb bags of concrete in a yard?

It must be well dosed because it does not dissolve in water and can lower the effectiveness of chlorine if its level is too high. It should be measured once or twice a year. This is also important to remember when you are asking how much liquid chlorine to add to pool.

How much liquid chlorine to add to Pool for PH level?

Chlorine tends to vary the pH of the water. In addition, too high a pH can make chlorine inactive! The water in your swimming pool should not be too acidic or too basic, so care must be taken to maintain a neutral pH (between 7.2 and 7.4 ideally). The rates can be expressed in mg / L or in ppm (parts per million). This last unit is very common in water treatment and its conversion is very simple: 

1 mg / L = 1 ppm.

To properly dose the chlorine in your pool, it is important to know the volume of your pool. You have chosen to treat your pond with chlorine, but you do not know how to do a test, or which tester to use? Rest assured, we are going to see together how, why and with what to carry out a swimming pool chlorine test.

Why test the chlorine in your swimming pool?

Water too chlorinated or otherwise not enough chlorine can have harmful consequences on your health and on the condition of your pool. And these are all when it comes to the question how much liquid chlorine to add to pool.

Similar Posts